-40%

5 pc of IGT S2000 slot machine Mini wedge bulbs & 5 light sockets(BULB & SOCKET)

$ 9.5

Availability: 30 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: New

    Description

    PLEASE READ THIS AD COMPLETELY TO THE BOTTOM OF THE PAGE BEFORE BUYING MY PARTS
    I DON'T WANT ANY
    MISUNDERSTANDINGS
    These parts can be used in 98% of all IGT S2000 slot machines
    The reason I say 98% is because the very 1st S2000 slot machines made between 1998 and 1999 and some were made up until the year 2000 most of these models have a different type of circuit board installed and are prototypes slot machines.
    Prototypes are things that are in the process of being tested almost everything made goes through some sort of testing stage and the circuit boards used in the prototypes have smaller holes and were starting to be changed out late in the year of 1999 but they
    continued using them into the year 2000 the reason is that one of the manufacturing location still had the old parts instock and continued using them until the stock ran out.
    The location where these parts are installed in the holes and that is what the issue is the holes are slightly smaller on most of the prototype models of the S2000 slot machines
    Most of the S2000 that these may or may not fit are called proto types and will have on the ID plate S2000 prototype.
    But all is not lost if you happen to have a prototype and you need these parts you can either make the holes on the circuit board bigger
    which I do not recommend
    or you can use fine grade sandpaper to remove some of the plastic just enough for the sockets to slide into the holes.
    I have 5 Mini IGT S2000 slot machine black plastic mini light sockets and 12 volt mini light bulbs
    These are used in S2000 slot machines wedge bulbs that are 12 volt
    Included:
    The 5 mini black plastic light sockets.
    The 5-T5 mini wedge Bulbs in the photo are included.
    DUE TO THERE BEING SO MANY VARIATIONS OF IGT SLOT MACHINE PARTS
    THAT CAN FIT MANY DIFFERENT TYPES OF IGT SLOT MACHINES
    SOME OF THE PARTS CAN BE SWITCHED
    BETWEEN THE MANY DIFFERENT MODELS OF IGT SLOT MACHINES
    A LOT OF IGT PARTS LOOK ALMOST EXACTLY THE SAME
    BUT MAY HAVE DIFFERENT POWER CONNECTORS
    THE MOUNTING HOLES MAY NOT LINE UP
    THEIR CAN BE MANY SLIGHT
    VARIATIONS TO THESE PARTS
    THE PART MAY LOOK EXACTLY THE SAME AND IF YOU JUST
    TAKE A QUICK LOOK YOU MAY NOT NOTICE THE DIFFERENCE
    BETWEEN THE PARTS AND END UP BUYING THE WRONG PARTS
    I HAVE PROVIDED PHOTOS OF WHAT PARTS I AM
    SELLING MAKE SURE YOU LOOK AT THE PHOTO'S
    AND COMPARE THE PARTS IN THE PHOTO'S
    TO THE PART YOU ARE REPLACING BEFORE BUYING PARTS
    THAT WAY YOU DON'T END UP BUYING THE WRONG PARTS.
    ALL SALES ARE FINAL
    ALL SALES ARE FINAL