654540-001 SATA/SSD 2.5" to 3.5" Drive Adapter FOR hp651314-001 774026-001

Description

HP 654540-001 2.5" SAS/SATA/SSD to 3.5" Drive Adapter Converter
Brand New with 4 x 2.5" +4 x 3.5" Drive Screws
Note: This adapter can convert any 2.5" SAS/SATA/SSD drive to 3.5" form factor. However, for 2.5" SAS drives, this adapter will change dual port to single port. This is fine for most applications. But if your application requires dual port, this adapter will not work for you. And, as always, a SAS controller is required in order to support SAS drives. A 2.5" SAS drives with this adapter installed will not work on a SATA controller although its connector looks exactly the same as a normal SATA connector
Note: This adapter is compatible with all the 3.5" SAS/SATA drive caddie trays from HP, Dell, IBM, or other manufacturers, such as HP 651314-001, IBM 69Y5284, or Dell F238F.dell kg1ch
Description:
This adapter can adapts any 2.5" form factor SAS/SATA/SSD Drive to 3.5" form factor drive, without cables or hassles. • Standard position mounting holes on Adapter's bottom and sides, equivalent to those found on a 3.5" hard drive, give you the flexibility to mount it anywhere a 3.5" drive is used.
• Adapter's fixed mount connectors are attached to a simple circuit board, assuring solid connections between devices, and the outside connector is positioned to plug into a backplane as the tray is inserted.
• Compatible with 3Gb/s and 6Gb/s SAS/SATA/SSD drives.
•No loss in data transfer speeds—no bridge chip used
• Structure -- SECC(Steel Electrogalvanized Cold-rolled Coil) Steel body
Package Contents:
•1 x 2.5" to 3.5" SATA SSD HDD Adapter(654540-001)
•4 x 2.5" Drive Screws + 4 x 3.5 " Drive Screws