-40%

Universal slot machine 25 cent coin mechanism fits machines from 1970s to 1980s

$ 26.4

Availability: 100 in stock
  • Condition: Used
  • All returns accepted: ReturnsNotAccepted
  • Type: Mechanical Slot Machine

    Description

    PLEASE READ THIS AD COMPLETELY TO THE BOTTOM OF THE PAGE BEFORE BUYING MY PARTS
    I DON'T WANT ANY MISS-UNDERSTANDINGS
    I have a used Universal Slots slot machine
    25 cent coin mechanism
    it's been tested and seems to working as it should
    I have inserted many quarters testing it and it's
    working it does reject some quarters and that's normal
    for any
    mechanical coin mechanism
    It's hard to tell from my photos but it a very clean and shiny
    coin mechanism it looks new but it's not.
    I have a front and back photos
    and also a side view
    The side view shows 2 flat head screws
    there are 4 all together 2 on each side these
    are removable screws
    there are 3 holes on each side
    the screws can be removed up or down to fit your type of Universal slot machine
    most of the Universal slots use the 2 lower holes and I will place them into
    the 2 lower holes on each side before shipping.
    If your Universal machine uses any other holes
    tell me and I will place them into the
    the location you
    specify
    The Universal slot machine in the photo
    is not included it's just for a reference
    THIS COIN MECHANISM WILL NOT REPAIR ANY BROKEN MACHINE
    THE MACHINE MUST BE IN WORKING ORDER.
    THIS IS JUST A REPLACEMENT FOR YOUR COIN MECHANISM
    IF KEEPS REJECTING MOST IF NOT ALL OF THE COINS
    YOU ARE INSERTING
    OR
    IF THEY KEEP GETTING JAMMED UP AND YOU HAVE
    TO KEEP HITTING THE REJECT BUTTON TO CLEAR THE STUCK COINS
    IF THAT'S HAPPENING THEN YOUR COIN MECHANISM
    IS MOST LIKELY WORN OUT.
    TO FIND OUT CHECK BELOW:
    THEIR IS A ADJUSTMENT ON THE COIN MECH
    IT'S CLOSE TO THE TOP OF THE COIN MECH
    WITH THE SLOT MACHINE DOOR OPEN YOU SHOULD BE
    ABLE TO SEE IT THEIR SHOULD BE A SCREW
    THAT IS NORMALLY A FLAT DRIVE SCREW IT ALSO CAN BE A PHILLIPS
    HEAD SCREW
    THAT
    YOU CAN TRY TO ADJUST IT BY TURNING IT
    IF YOUR COINS KEEP
    GETTING STUCK WHAT IT DOES IT WIDENS
    THE GAP SO THE COIN SLIDES THROUGH EASIER
    BECAUSE SOMETIMES THE COIN MACHANISM
    GETS SO DIRTY THE COINS WILL STICK
    YOU SHOULD NOT NEED TO TURN IT VERY MUCH TO ADJUST IT
    CHECK THAT BEFORE MAKING YOUR PURCHASE
    I DON'T WANT YOU TO REPLACE A WORKING PART
    IF YOU DON'T NEED TO.
    ALL SALES ARE FINAL
    ALL SALES ARE FINAL